The bracket should fit so the XLR connector faces the rear of the microphone, and the Shure logo on the back of the microphone is right-side up. There is positive pressure on the diaphragm that produces positive voltage on pin 2 relative to pin 3 in the Shure SM7B. Complete product documentation, technical support materials, software and firmware, and other tools and resources for all Shure products, in one place. The air suspension shock isolation and the pop filter eliminate both mechanical noise and breathiness. I'm the owner and creator of ImprovePodcast.com, the site dedicated to providing actionable solutions for podcast creators. You will not find such a wide range of frequency response on microphones in the comparable price range. The Shure SM7B comes with one of the finest pop filters, which is effective even if you come very close to the mic. If you are looking for the ideal XLR cable for your SM7B, the Mogami Gold or Mogami Reference Studio Cables are the right choices for you. The low-end is effortless, and there is a predictable proximity effect, the combination of these two qualities makes the microphone stand out from its counterparts. To set up the SM7B in the microphone stand mounting configuration, proceed as follows: NOTE: If the tightening nuts do not hold the microphone in position, one or both of the brass sleeves may not be properly seated within all the washers. If desired, adhere the supplied velcro strips around the microphoen grille, approximately one inch from the base of the grille (as shown) to hold new windscreen in place. If you are all set to launch your Podcast and you are on the look-out for the right equipment, your search for a microphone ends here. (2,724 KB), Rugged construction for securing the microphone cartridge, Detachable close-talk windscreen and switch cover plate included, Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting, Dynamic cartridge with flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech, Also useful for close-miking instruments in studio where warm and smooth full-frequencies are a must, 1 - A7WS Detachable Windscreen, 1 - RPM602 Switch Cover Plate. Use it with a transparent sounding preamp or mic activator that works well with its smooth sound and thickening characteristics and lends it enough gain. Yes, the technology behind the dynamic mic is much better developed, and it just handles sound better. With its detailed audio profile, words may travel far, but they always arrive at … Whether it’s broadcast, podcast or recording, voices need to be handled with care. But even without these features, the microphone is capable of capturing a clear, uncolored recording, which makes it a versatile tool for recording more than just vocal performances. For deep dive into XLR cables, check this XLR for podcast guide. Embossed single-diaphragm, side-address microphone for highly critical studio and live sound productions. It will work well in small spaces. Dark gray enamel aluminum and steel case with dark gray foam windscreen. My goal is helping people to develop their podcasts into effective marketing and sales tools. In addition to its standard windscreen, it also includes the A7WS windscreen for close-talk applications. So words get through and the rest stays out of the mix. For professional recording and streaming at home or in the studio with both USB and XLR outputs. To remove, grip at the base of the windscreen and pull while twisting. Should I use Shure SM7B with a shock mount? PAG/NAG is a concept that can be used to determine if a sound reinforcement system can produce enough gain to provide an optimal listening experience before causing feedback.